Durusil Silicone Tape it is non-adhesive, it does not stick to any surface by itself. When stacked, it sticks/boils together when it comes into contact with itself. It does not leave any sticky residue and provides a clean appearance.
5m
-55°C 
DURUSİL SILICONE TAPE FEATURES
It is non-adhesive, does not stick to any surface by itself.
Excellent sealing
Wide temperature resistance range (-55°C / +260°C)
High dielectric strength
Resistant to aging
High resistance to moisture
Excellent ozone resistance
DURUSİL SILICONE TAPE AREAS OF USE
It is used in many areas from insulation and protection to sealing applications.
Insulation and protection of cable and connection components
Air and water impermeability for hoses and pises
Wrapping on tool handles
In place of heat shrinkable bands and tubes
On metal connection pieces to stop corrosion
Leakproofing applications on engine areas
DURUSİL SILICONE TAPE HOW THE USE?
Moreover, it is very practical!
Clean the surface that will be wrapped and cut off the length of tape to be used
Remove and discard the clear seperation film. Tape works on either side.
Hold one end of the tape and apply a complate wrap around the object and back onto itself. While wrapping, maitain removing the seperation film.
Stretch the tape to about twice its normal length and, while maintaining the tension, immediately wrap it around the object. Apply wraps with a 50% overlap onto itself.
After the end of the wrap, press slightly. the tape will be fused şn seconds. It is not recommended repositioning and removing. Chemical bonding is completed in 24 hours at room temperature.
DURUSİL SILICONE TAPE TECHNICAL DATA
Technical Values| Özellikler Properties | Birim Unit | Değer Value | Standart Standard |
| Thickness Kalınlık | mm | 0,5-1 | |
| Width Genişlik | mm | 25-40-55 | |
| Length Uzunluk | m | 5-10 | |
| Dielectric Strength Dielektrik Dayanımı | kV/mm | 6-11 | ASTM D 2148 |
| Hardness Sertlik | Shore A | 40±5 | ASTM D 2240 |
| Density Yoğunluk | g/cm3 | 1,10 - 1,14 | EN ISO 1183-1 A |
| Tensile Strength Kopma Mukavemeti | N/mm2 | 6 | DIN 53504 S2 |
| Elongation at break Kopma Anında Uzama | % | 600 | DIN 53504 S2 |
| Tear Strength Yırtılma Mukavemeti | N/mm | 24 | ASTM D 624 B |
| Temperature Resistance Sıcaklık Daynımı | -55 + 260 °C |
Raf Ömrü 3 Yıldır. (Kuru ve serin ortamda, uygun saklama koşullarında)
Shelf life is 3 years.( in dry and cool place, suitable storage conditions)
Müşteri talebine istinaden özel ölçülerde üretilebilir.
It can be produce different dimensions according to customer demand.
Renk: Siyah - Kırmızı (Müşteri talebine istinaden farklı renklerde üretilebilir.)
Color: Black - Red (It can be produce different colors according to customer demand.)
For temporary repairs only. It cannot be reused. It is not recommended to change the position after sealing. This information is only recommendations based on our experience.
